Getting Started with Monit for Server Monitoring – CloudSavvy IT

Must read

How to disable and delete Samsung Pay from your Galaxy phone

When it comes to paying conveniently, Samsung Pay makes using your phone as a bank card an easy process; however, there may come...

Best OnePlus Nord N200 5G cases 2021

Best OnePlus Nord N200 5G cases Android Central 2021 The best OnePlus Nord N200 5G cases will protect your new sleek device and keep its 90Hz Full...
Bhawani Singh
I am a blogger who believes in delivering latest tech news from around the world to my viewers.

Monit is a server monitoring program that can check the processes running on your system to ensure that they’re always online and operating within reasonable CPU and memory limits. It also comes with a web interface to monitor your system.

What Does Monit Do?

Essentially, Monit will check in on a given process every two minutes (by default) to see how it’s doing. It keeps a log of resource usage, and can take action if an error occurs. This includes relaunching crashed processes, and restarting processes using too many resources.

Monit defines its behavior entirely through config files. Here’s the default config for MySQL as an example:

check process mysql
  with pidfile /var/run/mysqld/
  start program = "/usr/sbin/service mysql start" with timeout 60 seconds
  stop program = "/usr/sbin/service mysql stop" with timeout 60 seconds
  if totalmem > 400 MB for 5 cycles then alert
  if totalmem > 600 MB for 5 cycles then restart
  if cpu > 50% for 5 cycles then alert
  if cpu > 90% for 5 cycles then restart
  if 3 restarts within 5 cycles then timeout

Monit is configured to monitor the running MySQL process. If it goes down, it can start it again using the start program = config. If MySQL starts using too many resources, it can be restarted automatically, though you’ll be warned by email first.

It can also be configured to monitor your system as a whole, and can alert you if your server is experiencing unusual load.

check system wp01
  if loadavg(5min) > 1 then alert
  if memory usage > 90% for 5 cycles then alert
  if cpu usage (user) > 90% for 5 cycles then alert

Everything Monit monitors is viewable from the web interface, which runs over port 2812 by default.

Additionally, you can view data for multiple hosts all in one place with the M/Monit utility, which does require a license but is free to try.

RELATED: How to Setup Slack Notifications for Low Disk Space On Your Server

Installing and Configuring Monit

Install Monit from your distro’s package manager; for Debian based systems like Ubuntu, that would be:

sudo apt-get install monit

Monit should come with default config, usually located at ~/.monitrc. If it didn’t (as was the case with a macOS installation) you can find the default config files here.

Monit’s web interface is configured to run on port 2812. This is fine, but it’s entirely open by default with a default password. We’ll want to lock it down to an authorized IP address and

set httpd port 2812
    allow your_ip
    allow admin:password

Change this password, of course. There’s a few more configuration options for the web interface, but this is good for now.

Monit can then be configured to monitor individual processes. Usually, this is done with the processes PID file (often found in /var/run/) which stores the current PID of the running instance of that process, since the PID will change whenever the process restarts.

check process nginx with pidfile /var/run/
    start program = "/etc/init.d/nginx start"
    stop program = "/etc/init.d/nginx stop"

You’ll need to pass Monit a command to start and stop your process. It should automatically restart if the process goes down, with no additional config, but if you want to restart based on resource usage, you’ll have to specify that yourself with a few if statements:

check process nginx with pidfile /var/run/
    start program = "/etc/init.d/nginx start"
    stop program = "/etc/init.d/nginx stop"
    if totalmem > 600 MB for 5 cycles then restart
    if cpu > 90% for 5 cycles then restart
    if 3 restarts within 5 cycles then timeout

Monit will send out alerts whenever something restarts, so you’ll be notified when something is wrong.

Once you’re done with the config, reload the monit daemon with:

monit reload

And start monitoring with:

monit start all

This should start the web interface as well, which you can use to verify that Monit is working properly, usually running on port 2812.

This is the basic config to get Monit running out of the box, but Monit has a lot more syntax. You can read the full manual on everything Monit can do to learn more.

Configuring Alerts

Monit can be configured to send email alerts whenever major issues occur, or when processes are restarted. You’ll need to add configuration for your mail server:

set mailserver
  port 587
  username "[email protected]"
  password "secret"
  with timeout 60 seconds

set eventqueue
  basedir /var/lib/monit/events
  slots 100

The first block defines the mail server to use. The easiest method would be to just use with a Gmail account, though you could install Postfix on your server to run locally, or use an enterprise email service.

The second line tells Monit to queue alerts, if the mail server isn’t reachable for whatever reason.

Obviously, you’ll also need to set the email address it sends to:

set alert [email protected]

Additionally, since Monit has the ability to run scripts with the exec command, you can set up custom alerts however you’d like. For example, you could set up a script to send you Slack notifications, store it as /usr/local/bin/, and run it whenever nginx changes PID or is restarted by Monit:

check process nginx with pidfile /var/run/
  start program = "/etc/init.d/nginx start"
  stop program = "/etc/init.d/nginx stop"
  if changed pid then exec "/bin/bash -c 'PROCESS=Nginx /usr/local/bin/'"
  if 1 restart within 1 cycle then exec "/bin/bash -c 'PROCESS=Nginx /usr/local/bin/'"

Note that all paths must be fully qualified, including /bin/bash and paths to executables in your local bin. And after you’re done modifying the config files, you’ll need to reload Monit again.

Source link

More articles

Leave a Reply

Subscribe to our newsletter

To be updated with all the latest news, offers and special announcements.

- Advertisement -

Latest article

Finding answers to the world’s drinking water crisis

However, this may not matter. A study conducted by scientists from Israel's Tel Aviv University found that even in urban areas such as...

Realme to Start Export of ‘India-Made’ Smartphones to Nepal From Q3

In India, Realme - with a 14.6 per cent market share in the June 2021 quarter.Realme is among the top four smartphone brands...

Rainbow Six Siege hints at a new Extraction themed event on the Consulate map

Rainbow Six Siege developers at Ubisoft seem to be teasing an upcoming event on the Consulate map. From what we have seen so...

AMD Radeon RX 6600 XT Graphics Cards Announced for 1080p Gaming

AMD has unveiled the new Radeon RX 6600 XT mid-range GPU, aimed at gamers who want to target high performance and high refresh...
- Advertisement -